Wire Arc Additive Manufacturing (WAAM) Explained
Curious about WAAM (Wire Arc Additive Manufacturing)? See how this technology works, when to use it over LPBF, and more.
Fused Deposition Modeling is an affordable and easy-to-use additive manufacturing technology. Combined with its cost-efficiency and short end-to-end lead times, this is a highly flexible 3D printing process with various materials available.
Fused Deposition Modeling (FDM), or Fused Filament Fabrication (FFF), produces parts from thermoplastics.
The key to the manufacturing process is a heated, movable nozzle and plastic filament. The plastic material is heated inside the nozzle above its melting temperature and then extruded on top of the previous printed layer. After extrusion, the material cools down and fuses with the existing layers. Through the repetition of this process, the plastic part is finally manufactured.
On the MakerVerse platform, FDM is typically used for rapid prototyping and functional prototyping, especially for visual and geometric assessments. In addition, it is also feasible to manufacture end-use parts with low-volume requirements. Specific use cases are jigs, fixtures, and parts for art, architecture, and model making.
FDM offers high-performance parts with high strength, toughness, impact resistance, and more.
The technology is also capable of printing flame-retardant parts. Parts made with these materials meet the high certification standards for specific industries, such as aerospace, rail, and electronics.
ULTEM 1010 and ULTEM 9085 are high-performance thermoplastics for FDM that are flame retardant.
Co-founder and CFO at nFrontier
MakerVerse gives you the flexibility to source parts however you need. Get instant quotes and quickly order parts with on-demand manufacturing. Our team of experts will work with you for large or complex orders to develop, align, and supervise a manufacturing quality plan from start to finish.
What’s the best material for your project?
Use our interactive technology and material advisor to find out.
Onyx is a micro carbon fiber filled nylon with excellent mechanical properties (strength, toughness) as well as chemical resistance.
Onyx is used in a variety of applications, both consumer and industrial. Its appearance and mechanical properties make it popular for end-use parts.
Curious about WAAM (Wire Arc Additive Manufacturing)? See how this technology works, when to use it over LPBF, and more.
Which one is right for your project? This guide explains when using MJF or SLS is the best fit for your parts.
Learn all the terminology in additive manufacturing, from A to Z-Offset.
Learn how to minimize costs when it comes to making metal parts with L-PBF technology.